From blinds, gates, circulation pumps, an electric door lock or the bathroom extractor fan; the Nano 2 Relay Tree provides flexibility so you don’t have to wire anything that you need to switch back to the panel. When controlling blinds you will additionally benefit from the built-in end stop detection.
 

• 2 digital outputs (potential free with common ground)

  - 250VAC 10A at cos φ = 1 (IEC)

  - 30VDC 10A

  - total load max. 12A

• Suitable for shading, lighting, fans and much more.
• Fully automatic end stop detection
• Designed for use in a Real Smart Home
• Intuitive commissioning thanks to Loxone Tree technology
• Compact design - 42x39x20.5mm

For switched circuits

In any installation, you’ll have something that needs switching; blinds, curtains, bathroom fans, circulation pumps, garage doors, gates, door locks, etc…

Meet the Nano 2 Relay Tree – the counterpart to the Nano DI Tree which you are already familiar with. This is ideal for switching loads in your installation – conveniently controlled with Tree – avoiding the need to run your switch circuit back to your main distribution board.

Two relays for local switching

From switched lighting circuits, a gate motor, heating pump, motorised door lock or bathroom extractor fan; the Nano 2 Relay Tree provides flexibility so you don’t have to wire anything that you need to switch back to the panel.  This minimises cable required at first-fix, reduces the overall installation time, and complexity.