-
-
-
Tổng tiền thanh toán:
-
Bộ trung tâm báo động thông minh JABLOTRON JA-100KR
-Bộ trung tâm báo động thông minh JA-100KR với tích hợp kết nối mạng LAN và radio module.
-The system JABLOTRON-100 has been tested according to EN 50131 class 2 and combines all the advantages of a wireless alarm system with bus technology and a safe web server-based communication.
-It is ideally suited for projects with numerous system components, many users and several security areas.
-The installation can either be realised solely with wireless technology or bus technology or a combination of wireless/bus hybrid technology. For wireless transmission, the system uses the particularly narrow-band and safe wireless transmission in the frequency range 868 MHz.
-This alarm system features a clearly arranged setup and a unique controlling and operating concept.
-Separate on and off buttons allow for an easy operation, even with complex systems.
-The comprehensive traffic light display allows to easily identify the status of the system.
The system can be accessed via smartphone as standard. After registering with the web service, extensive control functions are available.
-This service is free of charge. However, permanent Internet connection is required. Due to remote access via smartphone or PC, it is possible to request the status of the system or control connected devices, e.g. regulating the heating system or similar from a distance (home automation).
-Matching control panels: JA-110E (bus) and JA-150E (wireless)
-Number of addresses/loops (wireless and bus): 32 max.
-External power supply: 230 V/50 Hz.
-Energy supply: type A (EN 50131-6).
-Current consumption: 85 mA in standby, 125 mA during alarm.
-Maximum bus power supply with continuous load: 400 mA.
-Maximum intermittent output current (5 minutes): 1 A.
-Matching rechargeable backup battery NPA-12/2 ( DC 12 V/2.2 Ah) available at option.
-Operating frequency of JA-110R, bidirectional Jablotron protocol, 868 MHz.
-Event reports: approx. 7 million events including date and time
-Alarm verification via second detector or via adjustable and time-delayed response of the same detector (optional setting).
| Type of installation | Fixed installation |
|---|---|
| Nominal control panel voltage / frequency / fuse | ~ 230 V/50 Hz, T200 mA fuse 250 V, 5 x 20 mm ~ 115 V/60 Hz, T400 mA fuse 250 V, 5 x 20 mm |
| Operational AC voltage range | ~ 195 V ÷ 250 V ~ 110 V ÷ 120 V |
| Electric power/current | max. 23 VA/0.1 A |
| Protection class | II. |
| Back-up battery | 12 V; 2.6 Ah max. (lead-acid) |
| Low battery voltage (fault indication) | ≤11 V |
| Maximum battery charging time | 48 ÷ 72 hrs |
| BUS voltage/max. voltage ripple (red-black) | 12.0 ÷ 13.8 VDC/± 100 mV |
| Max. continuous consumption from the control panel BUS +RJ | 400 mA permanently (1000 mA for 5 minutes) |
| @ 12 hours backup (2.6 Ah) | LAN OFF: 125 mA – consumption of modules JA-190X (Y) LAN ON: 85 mA – consumption of modules JA-190X (Y) |
| Max. number of sections | 4 |
| Max. number of devices | 32 |
| Max. number of users | 33 |
| Max. number of PG outputs | 4 |
| Alarm connection | Jablotron BUS – dedicated wiring Wireless connection (with JA-111R) – unspecified wireless connection, Jablotron wireless protocol |
| Alarm system classification | Security grade 2/environmental class II |
| @ according to standards | EN 50131-1, EN 50131-3, EN 50131-6, EN 50131-5-3, EN50131-10, EN 50136-1, EN 50136-2 |
| @ environment | indoor general |
| @ operational temperature/humidity | -10 °C to +40 °C, relative humidity 75% no condensation |
| @ power | Type A – primary supply with a charged backup battery |
| @ event history | approx. 7 million latest events, incl. date and time |
| @ system reaction to communication loss | Fault or tamper – according to the pre-set profile @ BUS until 10 sec @ wireless communication in 2 hrs (report) @ wireless communication in 20 min, blocks system to be set |
| @ reaction to invalid code entry | After 10 wrong code entries a tamper alarm is triggered and according to the selected profile it blocks all control devices for 10 min |
| @ ATS classification | Supported ATS classes: SP2 – SP 5, DP2 – DP3 SPT: type Z Operation type: Pass-Througth Built-in LAN: SP2 – SP5 (with IP protocol) JA-190Y SP2 – SP5 (with IP protocol) JA-190X SP2 (with Contact ID protocol) LAN + JA-190Y DP2 – DP3 (with IP protocol) LAN + JA-190X DP2 (with IP / CID protocol) |
| @ ATS transmission protocols | JABLO IP, SIA IP, Contact ID, JABLO SMS |
| @ ATC protection against substitution and data protection | Jablotron protocol: Proprietary AES encryption with minimum 128 bit key ANSI SIA DC-09.2012 protocol with 128 bit AES encryption |
| LAN communicator | Ethernet interface CAT 5 (RJ-45) |
| Dimensions | 268 x 225 x 83 mm |
| Weight | 1450 g |
| Basic parameters of the JA-111R module | 868.1 MHz, <25 mW, GFSK < 80 kHz |
| Radio emissions | ETSI EN 300 220-2 (R module) |
| EMC | EN 50130-4, EN 55022, ETSI EN 301 489-7, ETSI EN 301 489-3 |
| Electric safety | EN 60950-1 |
| Operational conditions | ERC REC 70-03, ERC DEC (98) 20 |
| Certification body | TREZOR TEST |
