Tổng tiền thanh toán:
The Loxone Touch Nightlight is more than just a light. It's an alarm clock, night light, ambient light source and intuitive smart home switch all-in-one. Thanks to these features and its versatility, it is a great addition to every bedroom, from the master suite to a child's bedroom.
Wake up alarm clock fully integrated with your smart home
Integrated colour-changing light
Ambient light source
Digital display of time and outside temperature
Incorporates a Touch Pure for intuitive control
Freely positionable thanks to Loxone Air technology
The "Vienna" products in Antique Brass are limited-edition and are only available while stocks last!
|T5||Combined T5 input.||T5||–|
|Buttons 1-5||These inputs are hidden by default and can be displayed via the properties of the device.||Digital||0/1|
|Button 6||This input is controlled via the upper middle button on the Touch Nightlight Air.||Digital||0/1|
|Smart Actuator RGBW||RGBW Lighting output for the Backlight on the Touch Nightlight Air. This is a standard Smart Actuator output to be used with a Lighting controller.||Smart Actuator||–|
|Dimmer RGB||Combined RGB output. This only appears if the device is set to “standard” type.||RGB||–|
|Dimmer WW||WW output. This only appears if the device is set to “standard” type.||Analog||0…100|
|Temperature||Displays the temperature from different sensors. If used it will swap between it every 5 seconds.||Analogue||∞|
|Status LED||LED in the top button (button 6).||Digital||0/1|
Alarm Clock function
The lower button can be used to activate and deactivate the alarm clock. The status LED indicates whether the alarm clock is currently active or inactive. An alarm can be deactivated by pressing the lower button. If another key is pressed during an active alarm, the snooze mode is activated. This is indicated by a pulse of the lower LED.
Set Alarm time
To change the alarm time, hold down the lower button until the display shows the current alarm time. The alarm time can now be set using the left and right buttons. Press the lower button again to confirm the alarm time.
When using the 12-hour time format, the distinction between morning and afternoon is indicated by a dot on the display. The time format can be changed in the project’s properties in Loxone Config.
The Touch Nightlight Air automatically switches to “inactive mode” after 20 seconds. A distinction is made here between two display brightness levels (active/inactive). These brightness levels can also be adjusted via the visualization in the app or in Loxone Config on the assigned alarm clock block. If desired, the display can also be deactivated during inactivity.
If the temperature output is used in Loxone Config, the Touch Nightlight Air changes every 5 seconds between the current time and the current temperature during normal operation. If the output is not used, only the current time is displayed during normal operation.